MULTI-FUNCTIONAL SKIN SPA SYSTEM 11 in 1

(1) Hydrodermabrasion

Hydradermabrasion– the latest in skin care technology. Hydradermabrasion utilizes the natural healing powers of water and oxygen to effort lessly exfoliate the skin without the use of hard crystals or abrasive textured wands, generating deeply hydrated and healthier looking skin.

Application:
Rejuvenate sun damaged skin-face, neck, shoulders, back, arms and legs.
Reduce age spots.
Minimize of blotchy skin coloring.
Reduce acne and superficial scars from past injury.
Remove blackheads and whiteheads.
Reduce oily skin.
Improve overall skin health.

Hydrodermabrasion with diamond tips

In this type of treatment, dead skin cells are exfoliated and vacuumed off the face with a microdermabrasion machine, that uses microdermabrasion tips covered in tiny diamonds. This procedure is non-surgical ,known to be most effective on deep acne scars or old stretch marks.
Besides, the diamond tips together with the strong suction make it possible to exfoliate the skin more thoroughly than other procedures. With the flexibility of using different suction levels, it also increases blood flow to the skin, and that in turn helps to produce collagen.

Operation steps:
Clean your face before operation.
① Click the icon marked on the left picture to enter the Dermabrasion interface(right).

② Select bottle, adjust Vacuum and water level on the right side of the equipment, click to set working time, and press to start operation.
③ Press to stop operation.

(2) Oxygen Spray Treatment

Mechanism of spray oxygen

Operating steps:

① Clean skin deeply.
② Click the icon as the following picture shows.

③ You can set the operation time by clicking on the right.
④ Mix 2~3 drip SPA essential oil diluted with purified water into small cup of the sprayer, water should be about 2/3 of the cup, and then tighten the lid tightly. Oxygen sprayer can only with liquid products, other states product will cause pin hole jam.
⑤ Beautician hold the spray gun, press the control button to release oxygen, and pull backwards to spray water mist.
⑥ Spray oxygen from top to bottom starting from the forehead to the neck, careful not to spray into the eyes or nose, in the spray oxygen process, the beautician can appease, lift up, stretch wrinkles with the other hand, more helpful for nutrition products penetrate the skin, strengthen skin elasticity, spray rate should depend on the guests’ absorb state of oxygen.
⑦ Press to start operation, press to stop.

Cautions:
① The product should be liquid when using oxygen sprayer.
② Avoid spraying into mouth or nose when spraying oxygen.
③ Clean the small cup and the pipe inside the sprayer every time use it, to avid jam.

Clean method:
Pour the purified water into the small cup, and press the control button and then pullback towards.
Supply nutrients and moisture for the skin rapidly, smooth skin, lightening stains, improve chlorosis, dull conditions, make skin rosy, white, transparent, tender, tightening indeed, with special spa oils will be better.

(3) Biopolar/Three polar RF

① Click the icon as the following picture shows.
② To choose the treatment item: biopolar RF for eye; three polar RF for Face.
③ Click to set treatment time: 20 minutes for eye, 20-30 minutes for face.
④ Click to adjust the intensity 1(weak)-9 (strong).
⑤ Press to start operation.
⑥ To put some cooling gel on the treatment area, move the RF work head from inside to outside, from down to up. Should reduce the output intensity ,because there has less fat around the eye and Forehead.
⑦ The machine will pause when the treatment time is up, press to stop operation.
⑧ To clean the skin with warm water.
⑨ To clean and disinfect the RF work head.
(4) Bio Photoelctric

Applications:
BIO Microcurrent
Microcurrent is a low level of electricity that mirrors the body’s own natural electrical impulses. It is a non-surgical, non-invasive cosmetic technique that safely and effectively improves the health and appearance of the skin. When used in conjunction with specialized products a manual manipulations, these tiny microcurrent impulse encourage your body’s currents at a cellular level. The signs of aging are greatly reduced, while skin tone and elasticity are dramatically improved.

Red light
red light can enhance the cells activity, promote cells metabolism ,make skin excrete large number of collagen protein and fiber tissue to fill in their own, accelerate blood circulation, increase skin elasticity and improve withered and yellow dark condition of skin, then achieve the efficacy of anti-aging, anti oxidation and repairing skin

Operation steps:

① Click the Bio Photoelctric function shown on the following picture(left) to enter Bio Photoelctric interface(right). Before operation, the user should be applied with gel/essence on face.

② There are three working modes which can be chose according to clients’ need.

③ Click button to adjust intensity(from “1” to “9”).
Click to set working time. Press to start operation.
④ Press to stop operation.
*Precautions：
1. Please remove the metal ornaments when operating the machine. Working head moving slowly on the skin.
2. The current output should be within acceptable limits.

(5) Ultrasound

Ultrasonic, with the frequency of 1-3 million times per second, with the process to be transmitted to the body, is absorbed by epidermis dermis subcutaneous tissue, the absorption of ultrasonic waves is converted into thermal energy, thermal effects of ultrasound, the living tissue temperature increased slightly 0.5-1 ℃, promote capillary function and fine inter cellular lymph flow, helps transport nutrients to the cells needed for blood vessels, promote metabolism and to assist the flow of lymph, maintain healthy skin. Maintain skin elasticity/ break down fat and prevent obesity. 1 million vibrations per second ultrasound, when the wave is transferred to the organization, with the ultrasonic vibrations stimulate biological tissue and skin tissue, relieve tension, to maintain skin elasticity. Heated generated by vibration can make it easier to break down fat and help prevent obesity.

Application:

*Melts fat and cellulitis cell, maintain skin texture smooth
*Massage effect: helps to produce collagen and elastin, activates the fibroblast and enhances skin elasticity

Operation steps:

① Click the Ultrasound function to enter the next operation interface. Before operation, gel/essence should be applied on the users’ face.

② Click to select working mode.

③Click to select Intensity(from “1” to “9”), click on the right-top to set working time, and press button to start operation.
④ Press button to stop operation.

*Precautions：
1. Apply enough medium to the care area when operating.
2. Each part of the working hours should not exceed 30 mins.
3. Do not use on your heart etc.
4. Do not stay a long time in one part of the body.
5. After the instrument moves the audio work head can not be used for a long time in the no-load state

(6) Skin scrubber

With Ultrasonic Scrubber begins a new generation of aesthetic soft peeling. Using the high performance of ultrasounds, this exciting cosmetic breakthrough provides a safe painless and perfect physiological skin regeneration. By removing the superficial scaly layers of the skin, the Scrubber stimulates the revival of the skin tissue rendering it youthful and luminous from the first treatment.

① Click the skin scrubber function to enter the next operation interface.

② Click for Working time setting
③ Press button to start operation and button to stop operation.

④ Operation steps:
A. Click the “ON/OFF” button to open the skin scrubber. When turned it on, the indicator light will be on and there will be a shock.
B. The “VOL” button is used for selecting different modes and energy.
C. P- Indicator light
L- Low energy, continuous mode
Z- Medium energy, continuous mode
H- High energy, continuous mode

Medium energy, pulse mode
D. Press the “VOL” button to select the working mode the customer can accept.

(7) Photonlight (PDT)

General introduction of PDT:
Praised as “Magic light”, photon dynamical instrument is a biological active cold light, and not produce high heat. It applies low-energy and unique optical technology to skin care and treatment, natural and gentle; has prominent effects, low fatalness and no side effect. It’s skin nurse specialist, is fit for all kinds of skin, especially useful for seriously irritated skin, acne skin and has not able effect for those in sub healthy state tore cover and do skin protection and treatment.
Photon dynamical nurse therapy is a new technology, using the photon power to do skin maintenance and treatment, transfer light energy to cell energy, then accelerate cell growth and blood circulation, stimulate fiber cells to produce collagen proteins, increase skin elasticity and take important part in rehabbing aging and acne skin, lightening flecks, skin upgrade and tighten and easing burnable skin.

Application:
1. Improve symptom such as aging and loosening skin, big pore, slender wrinkles.
2. Improve pigmentary pathological changes, such as freckle, sunburn, senile plaques.
3. Improver dark complex ion caused by bad metabolism or poor circulation.
4. Repair and nurse the damaged skin.
5. Do detumescence, inflammation diminishing and scar elimination treatment for oil acne effectively.

Operation steps:

① Click the Photon Brush function shown on the following picture(left) to enter Bio Photoelctric interface(right).

② There are three working modes which can be chose according to clients’ need. And For PDT therapy, yours can choose the Red light and Blue light according to skin type;

③ Click button to adjust intensity(from “1” to “9”).
Click to set working time. Press to start operation.
④ Press to stop operation.
⑤ Press Red and Blue button to choose Red and Blue PDT Therapy, intensity from 1 to 9;